Wholesale Fully Automatic Acid Cleaner AC-300 For Cleaning Various Lab Utensils manufacturers and suppliers

Fully Automatic Acid Cleaner AC-300 For Cleaning Various Lab Utensils

Short Description:

Fully Automatic Acid Steam Countercurrent Cleaning/Acid Purification Integrated Machine： 1.Cleaning basket：cleaning basket can be replaced freely, which is more convenient. 2.Acid purification function:it can automatically purify waste acid,and rinse and dry the system.The discharge of waste acid is reduced to a greater extent. 3.Acid gas recovery unit: Have online pH monitoring and alarm. 4.Wifi wireless communication function:the distance is farther, the signal is more stable.

Send email to us Download as PDF

Product Detail

Product Tags

Product Description：

The acid cleaner is also known as Acid Steam Cleaning System or Trace Cleaning System. It uses acid vapor to clean the vessels in a sealed chamber. Through a built-in temperature-control heating system, all trace metal contaminants that are soluble in acid can be safely and efficiently removed by acid vapor. The used acid will then be drained from the chamber to prevent the extracted contaminants from being reintroduced to the cleaned vessels.

Characteristic:Technical innovation:

One-Way Vapor Technology(OWV)

No secondary contamination from the waste acid

OWV ensures that the used acid is drained directly from the system so there is no reflux into the acid reservoir risking contamination. In traditional techniques, the waste acid will repeatedly reflux into the acid reservoir and evaporate. As a result, the waste acid constantly contaminates the pure acid. The resulting vapor becomes dirtier and the cleaning efficiency worsens. Consequently, even with trace metal grade pure acid only ppb-level cleaning can be achieved.

Real Temperature Control Technology(RTC)

Sub-boiling Guaranteed

Accurate measurement is essential for precise control. The Teflon treated sensor directly monitors the actual acid temperature in real time. This ensures that the acid vapor is generated under an ideal sub-boiling condition. Traditional cleaners only monitor the heater‘s temperature. This results in less accuracy of the measuring, less control of the acid temperature and lower purity of the acid vapor.

Unique PTC heater

No overheat

The maximum temperature is autonomously controlled by heater.

Under the unlikely event that all temperature control systems have failed, the maximum temperature is autonomously controlled by the heater and will not exceed 250℃ (482°F) which prevents damage and risk of fire.

Acid Vapor Scrubber

No hood needed

Traditionally, both the cleaning chamber and the waste bottle required an air vent to maintain air pressure balance, resulting in inevitable acid vapor leakage.

AC300 uses a unique high-performance acid vapor scrubber which eliminates this problem – yielding an absorbing efficiency over 99% and an adsorbing capacity of 50%.

Made of PTFE

More durable, More Stablize

The whole machine is made of PTFE material

PTFE, also known as Teflon, can resist concentrated acids including HF and aqua regia. There is no quartz containing ppm-level metal elements that is unable to resist hydrofluoric acid (HF). Digestion often involves HF.

One-piece molding, no dead angle, no cracking The cleaning chamber is an integrated unibody which will withstand many decades of simultaneous hot acid and high temperature. In contrast models made with multiple pieces are vulnerable to cracking, dead corners and accumulated dirt.

Real-time level monitoring

No inadequate cleaning or overflow

The level sensors monitor the real-time level of pure acid, pure water, waste acid, and waste water.

Once the low level of pure acid or water is detected, the cleaner will remind you to refill it before starting to prevent inadequate cleaning. Once the high level of waste is detected, the cleaner will not allow you to start the cleaning to avoid overflow.

Automatic Acid Dilution

No chemical hazard

The dangerous concentrated acid can be automatically diluted to any desired concentration

Zero human contact with the acid

Various cleaning basket

Amerlab has the best solutions for your scientific cleaning needs. Amerlab invented the hollow steam pipe which is able to guide steam to the maximum levels. The steam sprays the inner surface of the vessel through the jet holes around the post. This greatly improves the cleaning efficiency. In contrast, the traditional solid support rod is unable to guide any steam. Furthermore, it even blocks the steam’s pathway.

Company file:

Exhibition

Hangzhou Xipingzhe Biological Technology Co., Ltd

XPZ is a leading manufacture of laboratory glassware washer,located in hangzhou city,zhejiang province,china.XPZ specializes in research,production and trade the automatic glassware washer which is applied to Bio-pharma,Medical health,Quality inspection environment ,food monitoring,and petrochemical field.

XPZ is committed to help solve all kinds of cleaning problems.We are the main supplier to Chinese inspection authorities and chemical enterprises,meanwhile XPZ brand has been spread to many other countries,like india ,UK,Russia,South Korea,Uganda,the philippinese etc.,XPZ provides integrated solutions based on customized demand,including product selection ,installation and operate training etc.

We will gather more enterprise advantage to provide innovtive products with high quality and excellent service ,to keep our long-term friendship.

Certifications

FAQ:

Q1: Why Choose XPZ ?
We are the main supplier to chinese inspection authorities and chemical enterprises.
Our brand has been spread to many other countries,such as India,UK,Russia,Africa and Europe.
We provide integrated solutions based on customized demand,including product selection,installation and operate training.
Q2:What’s kind of shipment can customer choose?
Usually ship by sea, by air.
We try our best to meet the transportation requirements of customers.
Q3:How to ensure the product quality and after-sales service?
We have CE, ISO quality certificate and etc.
We have the excellent after-sales service and after sales engineer.
Our products have a warranty period.
Q4:Can we visit your factory online?
We are very supportive.
Q5:What kind of payment can customer choose?
T/T,L/C and etc.